Life Line Series APFC Panel:

• Compact floor mounting modular series for medium to large industries.
• Available upto 1000 KVAR rating.
• Suitable for both balanced and unbalanced load.
• Advanced 3 phase controller with inbuilt load analyzer.
• 3 Phase - Energy analyzer with data logge.
• Auto manual selection through selector switch.
• Axial flow/Centrifugal fan controlled.

Neptune - Ducati Make:
Automatic Power Factor Correction System:
In Life Line Series P.F. Compensation System the power range goes from 50 kvar to 1000 kvar. They are designed for medium to large load networks. They are highly reliable, cost effective solution for maintaining high network power factor.

They are ultimate solution for compensation of unbalanced loads. The compensation is released by measuring the reactive power of the system, through 3 CTs from all 3 phase. This makes it best suited even for most unbalanced loads apart from balanced loads.

They come equipped with following outstanding features:

• Incomer TP MCCB / ACB as per rating.
• Micro processor based Neptune Phasetrac range of 3 phase P.F. Controller with inbuilt load analyzer.
• Inbuilt 3 phase energy analyzer with data logger.
• Modular floor mounting system.
• Side/front louvers with Axial flow / Centrifugal fan and thermostat.
• Heavy duty specially designed neptune capacitor duty contactors with high termal current withstand capacity.
• MCBs for control protection.
• Auto / Manual selection through sel. switch.
• HRC Fuses/MCCB - 35kA (optional) for backup protection of capacitor banks.
• High electrolytic grade aluminium bushbar installed on TP supports.
• Discharge resistors (MOR)
• Standard one year warranty with NSL - 10 Capacitor or three year warranty with long life LL-10 Mono 16 Capacitors.
• Powder Coated - RAL 7035 / Neptune Blue, structure finish.
• Bottom entry system available with option or front glass.

General Characteristics:
Control Module with Data Logger:

• Measurement of A, V, PF, Cos phi, W, VAR, VA (sigma W, sigma VA, sigma Var etc)
• Sense 1% of load current.
• Auto/Manual mode selection with indicator light.
• Automatic calculation of C/K value.

Data Logger Module with Energy Analyzer:
Energy Analyzer with DataLogger is having facility to record and display all the 3 Phase parameters of Mains where PFC system is connected. The recording shall be carried out in inbuilt data Logger. It is possible to log the data with adjustable time difference of 1 min. to 24 hours. Same way it is possible to display (optional) all hours. Same way it is possible to display (optional) all the electric parameters pertaining to PRC system in Control module. The parameters for PFC panel can also be logged in same way. The Energy Analyzer is having real time clock and date. The 3 phase 32 parameters for Mains and PFC systems are available with logging facility to know working efficiency of complete system.

Electrical & General Characteristics:

• Power range: 20-1000 KVAR (440V)
• Main voltage (working voltage): standard 440V (other voltage on request)
• Rated frequency: 50 Hz
• Altitude: less-than or equal to 2000 m a.s.l.
• Relative humidity: 70% max. at 20^o C
• Duty: continuous
• Temperature class: 25 + 55^o C
• Power suppy line: Three-phase + ground + neutral (for 440V mains version only)
• Relay current input signal: from CT online.../54
• Relay voltage input signal: Picked up internally

Installation:

• Indoors, floor-mounted, invertilated, non-dusty enviroment, away from direct sunlight.
• Cable inlet from top or bottom.

Disconnecting Switch:

• TP MCCB - 35 kA / 50 kA breaking capacity or TP ACB for higher ratings.
  

Mechanical Structure:

• The basic structure is made of white CRCA steel sheet with mounting plate Zinc galvanized.
• The outer steel structural work is painted with cleaning treatment, degreasing, phosphating 70 mm thickness paint with epoxy powder colour RAL7035.
• Louvers on front door/side panels with Axial Flow/Centrifugal fan.
• Capacitor mounted on front removable racks offering easy replacement & maintenence.
  

Wiring & Busbar:

• HR FRLS Copper wires are used for all wiring connections from Electrolytic gradeAL. Busbar.

Fuses / MCCBs for Backup protection:

• HRC Fuse Link with base
• The fuses are of 80 kA breaking capacity
• TP MCCBs (35kA) for backup protection (optional)

Contactors:

• Equipped with Heavy Duty Capacitor Duty Contactor with early make contacts.
• Coil voltage 230V, 50-60Hz.

Capacitors:

• Series NSL - 10 Floppy Cap single-ph. elements wired in a delta connection rated 450V.
• Optionally Long Life LL - 10 Mono 16 Series Capacitors, rated 450V.

Protection Devices:

• Each capacitor bank is equipped with discharge devices capable of reducing the residual voltage to below 10 % of the rated capacitor voltage in about 30 seconds.